Chromiumtech Limited

Remove Factory Mirror Cover
Remove Mirror Glass from the Mirror Glass adjuster
Remove turning signal blinker
Remove the inner door panel
Remove Speaker
Turn Mirror to expose Mirror Screws, Remove Mirror
Disconnect power mirror wire connector
Feed one end of the wires for the turn signal mirror glass into the door and wrap around power mirror wires
Feed other end of the wires into the mirror following the same route as the power mirror wire inside the mirror
Attach the new turn signal mirror glass and connect the wires (match of black to black, black/white to black/white)
Feed wires through the rubber grommet where the other wires exit the door
Feed wires in between the fender and the body to the turn signal hole
Connect the wires using the supplied scotch locks (splice black with brown from the fender turn signal, splce black/white with blue/yello from the fender turn signal)
Test before reassembling
Reassemble
Repeat the same of the other side of the vehicle
You are done. Congrats with your new turn signal mirrors !